* commit 'c8dcff0cdb17d0aa03ac729eba12d1a20f1f59c8':
h264: factor out calculating the POC count into a separate file
Merged-by: Clément Bœsch <u@pkh.me>
* commit '3176217c60ca7828712985092d9102d331ea4f3d':
h264: decouple h264_ps from the h264 decoder
Main changes:
- a local GetBitContext is created for the various
ff_h264_decode_seq_parameter_set() attempts
- just like the old code, remove_sps() is adjusted so it doesn't remove
the pps.
Fixes decode with Ticket #631http://ffmpeg.org/pipermail/ffmpeg-user/attachments/20111108/dae58f17/attachment.mp4
but see next point as well.
- ff_h264_update_thread_context() is updated to work even when SPS
isn't set as it breaks current skip_frame code. This makes sure we
can still decode the sample from ticket #631 without the need for
-flags2 +chunks. (Thanks to Michael)
- keep {sps,pps}_ref pointers that stay alive even when the active
pps/sps get removed from the available lists (patch by michaelni with
additionnal frees in ff_h264_free_context() from mateo)
- added a check on sps in avpriv_h264_has_num_reorder_frames() to fix
crashes with mpegts_with_dvbsubs.ts from Ticket #4074http://samples.ffmpeg.org/ffmpeg-bugs/trac/ticket4074/mpegts_with_dvbsubs.ts
- in h264_parser.c:h264_parse(), after the ff_h264_decode_extradata() is
called, the pps and sps from the local parser context are updated with
the pps and sps from the used h264context. This fixes fate-flv-demux.
- in h264_slice.c, "PPS changed between slices" error is not triggered
anymore in one condition as it makes fate-h264-xavc-4389 fails with
THREADS=N (Thanks to Michael)
Merged-by: Clément Bœsch <clement@stupeflix.com>
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
Merged-by: Matthieu Bouron <matthieu.bouron@stupeflix.com>
* commit 'a6e27f7add2698fdd89911632b570c3d0c3f2aaa':
h264: factor out parsing the reference count into a separate file
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'e481458bc308ee838deaeacac51929514762e7a7':
h264: factor out pred weight table parsing into a separate file
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'a7da517f6a5c472f46f67dd33bb6b95ccc919923':
h264data: Move all data tables from a header to a .c file
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Make the SPS/PPS parsing independent of the H264Context, to allow
decoupling the parser from the decoder. The change is modelled after the
one done earlier for HEVC.
Move the dequant buffers to the PPS to avoid complex checks whether they
changed and an expensive copy for frame threads.
Libav, for some reason, merged this as a public API function. This will
aid in future merges.
A define is left for backwards compat, just in case some person
used it, since it is in a public header.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
get_ue_golomb() cannot decode values larger than 8190 (the maximum
value that can be golomb encoded in 25 bits) and produces the error
"Invalid UE golomb code" if a larger value is encountered. Use
get_ue_golomb_long() instead (which supports 63 bits, up to 4294967294)
when valid h264/hevc values can exceed 8190.
This updates decoding of the following values: (maximum)
first_mb_in_slice 36863* for level 5.2
abs_diff_pic_num_minus1 131071
difference_of_pic_nums_minus1 131071
idr_pic_id 65535
recovery_frame_cnt 65535
frame_packing_arrangement_id 4294967294
frame_packing_arrangement_repetition_period 16384
display_orientation_repetition_period 16384
An alternative would be to modify get_ue_golomb() to handle encoded
values of up to 49 bits as was done for get_se_golomb() in a92816c.
In that case get_ue_golomb() could continue to be used for all of
these except frame_packing_arrangement_id.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '792b9c9dfcf44b657d7854368d975b5ca3bc22ca':
h264: set frame_num in start_frame(), not decode_slice_header()
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
According to the spec, the reference list for a slice should be
constructed by first generating an initial (what we now call "default")
reference list and then optionally applying modifications to it.
Our code has an optimization where the initial reference list is
constructed for the first inter slice and then rebuilt for other slices
if needed. This, however, adds complexity to the code, requires an extra
2.5kB array in the codec context and there is no reason to think that it
has any positive effect on performance. Therefore, simplify the code by
generating the reference list from scratch for each slice.
Fixes out of array access
Fixes: 1430e9c43fae47a24c179c7c54f94918/signal_sigsegv_421427_2049_f2192b6829ab6e0eefcb035329c03c60.264
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In case of bitstream errors the deblock filter and slices can access uninitialized
top_borders from previous slices which did not fill them as they stoped halfway due
to error or where entirely missing.
This also makes code using these tables deterministic in case of missing or damaged
slices
Found-by: Tyson Smith
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It is only used inside libavcodec.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The AVCodecContext.get_format callback is not only used for pixel format
negotiation with the API user, but also for hwaccel init. For the
latter, it's required that some codec parameters, in particular the
codec profile, are set when the callback is invoked.
This patch removes a get_format invocation where this is not guaranteed.
The codec parameters, including the profile, are really set further
below. (The same code path that sets the profile also calls get_format
properly too.)
This just happened to work by coincidence in most cases. For example, if
the API user just copied or reused the AVStream's AVCodecContext when
decoding, the profile would be set properly. But in some cases it
fails., such as with the sample WolfensteinTwitch.mp4 on the samples
server.
Remove the redundant get_format call. Apparently it serves no purpose
anymore, although it is possible that this was different at the time it
was added in commit ffd77f94a26be22b8ead3178ceec3ed39e68abc5.
This fixes hwaccel usage for API users which do not set the profile
when setting up the AVCodecContext (which is allowed).
Deprecate older VA pixel formats (MOCO, IDCT) as it is now very unlikely
to ever be useful in the future. Only keep plain AV_PIX_FMT_VAAPI format
that is aliased to the older VLD variant.
This is an API change.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
At least the new videotoolbox decoder does not actually set a frame if
end_frame fails. This causes the API to return success and signals that
a picture was decoded, even though AVFrame->data[0] is NULL.
Fix this by propagating end_frame errors.
