This will allow to avoid the temporary buffer and memcpys
when repacketing annex B to mp4-style H.264/H.265 without
searching twice for start codes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Matroska does not have different profiles that allow or disallow
in-band extradata, so one can just use the ordinary H.264 function
for H.265, too. (Both use ff_avc_parse_nal_units() internally anyway.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids allocations+copies in all cases, not only those
in which the desired OBUs are contiguous in the input buffer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Document that it can be used with a NULL AVIOContext to
get the output size in a first pass.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
WavPack's blocks use a length field, so that parsing them is fast.
Therefore it makes sense to parse the block twice, once to get
the length of the output packet and once to write the actual data
instead of writing the data into a temporary buffer in a single pass.
This speeds up muxing from 1597092 to 761850 Decicycles per
write_packet call for a 2000kb/s stereo WavPack file muxed to /dev/null
with writing CRC-32 disabled.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Matroska uses variable-length elements and in order not to waste
bytes on length fields, the length of the data to write needs to
be known before writing the length field. Annex B H.264/5 and
WavPack need to be reformatted to know this length and this
currently involves writing the data into temporary buffers;
AV1 sometimes suffers from this as well.
This commit aims to solve this by adding a callback that is called
twice per packet: Once to get the size and once to actually write
the data. In case of WavPack and AV1 (where parsing is cheap due
to length fields) both calls will just parse the data with only
the second function writing anything. For H.264/5, the position
of the NALUs will need to be stored to be written lateron.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Avoids the surprise of using pb for the main AVIOContext
at the beginning and end of mkv_write_header() and for
for the dynamic buffer opened for the Info element
in the middle of mkv_write_header().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Using start/end_ebml_master() to write an EBML Master element
uses seeks under the hood. This does not work if the output is
unseekable with the AVIOContext's buffer being very small
(the size of the currently written Matroska EBML header is 40)
or with the AVIOContext being in direct mode, because then
this seek can't be performed in the AVIOContext's buffer.
So using an approach that does not rely on seeking at all
is preferable; this is achieved by switching to EbmlWriter.
Also factor writing the EBML header out into a function of its own.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also check the (user-provided) tags for being overlong; the earlier
code had an implicit unchecked size_t->int conversion.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This muxer currently uses two ways to ensure that no bytes
are wasted by writing unnecessary long EBML length fields
for Master elements and the (Simple)Block element
(all the other elements are fine as one either already has
the right length or getting the actual length is easy
and necessary anyway):
Either use an upper bound that is good enough in case one
is available or write the data into a dynamic buffer first
to get the length; the former approach is impossible in
lots of cases, whereas the latter incurs allocations and
memcpying. It is therefore unfeasible to use the latter
for e.g. the attachments or the BlockGroups.
This patch adds a third alternative to complement the other two:
It consists of an EbmlWriter that one can add EBML elements to
that can be written later by calling ebml_writer_write();
the latter function first traverses the written elements recursively
and calculates the length of each element; then a second pass
is performed in which all the elements are written directly
(without any seeks).
This new API also performs checks for overlong elements;
this is in contrast to put_ebml_string() which simply performs
a size_t->int conversion even for strings originating from the user.
The new API is designed to have very low overhead: It uses
stack arrays and performs no allocations; this also comes
at a price: Right now, it can only be used in contexts in which
there is a compile-time upper bound for the number of elements.
It is also incompatible with storing the offset of an element
in order to update this field later. Furthermore, it puts
the onus of memory management (i.e. ensuring that pointers stay valid)
on the user.
These restrictions might be overcome in the future.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This would happen in case non-WebVTT-subtitles had BlockAdditional
or DiscardPadding side-data. Given that these are not accounted for
in the length of the outer BlockGroup (which is a quite sharp upper
bound) it is possible for the outer BlockGroup to use an insufficient
number of bytes which leads to an assert in end_ebml_master().
Fix this by not opening a second BlockGroup inside an already opened
BlockGroup.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
add a dictionary that maps "src_url" -> "expiry;dst_url", the dictionary
is checked before issuing an http request, and updated after getting a
3xx redirect response.
the cache expiry is determined according to the following (in desc
priority) -
1. Expires header
2. Cache-Control containing no-cache/no-store (disables caching)
3. Cache-Control s-maxage/max-age
4. Http codes 301/308 are cached indefinitely, other codes are not
cached
This is similar to the faststart option of the mov muxer, yet
in contrast to it it works together with reserve_index_space
(the equivalent to reserved_moov_size): If the reserved space
does not suffice, the data is shifted; if not, the Cues are
written at the front without shifting the data.
Several tests that cover (not only) this have been added.
Implements #7017.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: division by zero
Fixes: integer overflow
Fixes: 43347/clusterfuzz-testcase-minimized-ffmpeg_dem_V210X_fuzzer-5846911637127168
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: lance.lmwang@gmail.com
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
mvhd and tkhd present the post-editlist duration, while mdhd should
have the pre-editlist duration. Regression since c2424b1f3.
Signed-off-by: Martin Storsjö <martin@martin.st>
Channel reordering is removed from this patch because the new channel layout
API will support it properly.
Signed-off-by: Marton Balint <cus@passwd.hu>
41f213c3bf629d549400e935e7f123e6cfa959ab accidentally added
an unused pixel_format option to the v210(x) demuxers.
Remove it before it really becomes part of the API.
Reviewed-by: Limin Wang <lance.lmwang@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The Matroska muxer has quite a lot of dependencies and lots of them
are unnecessary for WebM. By disabling the Matroska-only code
at compile time one can get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
parse_rtsp_message() is only called if the rtsp demuxer is enabled
and so it is normally compiled away if said demuxer is disabled.
Yet this does not happen when compiling with -O0 and this leads
to a linking failure because parse_rtsp_message() calls functions
that may not be available if the rtsp demuxer is disabled.
Fix this by properly #if'ing the unused functions away.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The AMR muxer doesn't have a private context, so it's priv_data
will be NULL. If it weren't, simply setting it to NULL would lead
to a memleak.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Forgotten in 1f447fd95463bbf39a78d886359a3006d82f6a94.
Also only enable amr_probe() and amr_read_header() in case
the AMR demuxer is enabled; this avoids having to add
a rawdec.o dependency to the muxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: John-Paul Stewart <jpstewart@personalprojects.net>
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Only allocate an audio stream if there is one in the data. Silicon
Graphics movie format will contain default values (16 bit samples, 2
audio channels, 22050 Hz sample rate) even when no audio is present in
the file. This confuses FFmpeg into thinking such an audio stream is
present with 0 samples in it.
There is a flag value in the format to indicate whether or not audio is
present. This patch checks that and behaves accordingly.
Signed-off-by: John-Paul Stewart <jpstewart@personalprojects.net>
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Peter Ross <pross@xvid.org>
In this case ff_isom_put_dvcc_dvvc() might not be available, leading
to linking failures. Given that WebM currently doesn't support DOVI,
this is fixed by #if'ing the offending code away if the Matroska
muxer is not enabled.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
